Wiring Done Right

Collapse

Announcement

Collapse
No announcement yet.

Top 4 Reasons Gas Surface Burner Won't Light - Appliance tip of the week

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Top 4 Reasons Gas Surface Burner Won't Light - Appliance tip of the week

    Appliance tip of the week.

    Top 4 Reasons Gas Surface Burner Won't Light


    Spark Module

    The spark modules provides power to each surface burner spark electrode. If the burner is produces a weak spark, or if the burner sparks intermittently, the spark module might be defective. Before replacing the spark module, first check the spark electrode and the spark wire. If the spark electrode and spark wire are not at fault, the spark module is likely defective. If the spark module is defective, replace it.

    Spark Ignition Switch

    When the burner is turned on, the spark ignition switch sends voltage to the spark module to produce a spark. If the spark ignition switch is defective, it won't send voltage to the spark module, and the burner won't be able to produce a spark. If your range's burner isn't sparking, check to see if the other burners are sparking properly. If the other burners are sparking properly, the spark ignition switch is likely defective.

    Spark Ignition Switch and Harness

    When the burner is turned on, the spark ignition switch sends voltage to the spark module to produce a spark. If the spark ignition switch is defective, it won't send voltage to the spark module, and the burner won't be able to produce a spark. If your range's burner isn't sparking, check to see if the other burners are sparking properly. If the other burners are sparking properly, the spark ignition switch is likely defective. If the spark ignition switch is not sold separately, you will have to purchase the switch and harness assembly.

    Spark Electrode

    The spark electrode sends a spark to ignite the gas in the burner assembly. If the spark electrode is defective or worn out, it might not produce a spark, or the spark might be too weak to ignite the gas. As a result, the spark electrode will make a clicking sound when the burner is turned on, but the burner won't light. If the spark electrode is defective, replace it.


    Stove burner won't light-------->

    Search Over 2.1 Million Appliance Parts from AppliancePartsPros

    Appliance parts from RepairClinic

    This 29" chest freezer by GE offers 5 cu. ft. of freezing capacity - Shop Now for 13% OFF!

    jeff.
    Appliance Repair Aid
    http://www.applianceaid.com/

    My brain is like a web browser. 50 tabs are open, half of them are frozen, I don't know where the music is coming from and a "low battery" notification just keeps popping up.
Working...
X