Tweet
Appliance Tip of the Week...
Replacing GE Spray Arm
The spray arm and support are a one piece deal like many of the GE built dishwashers are.
Spray arm parts link
To Remove Lower Arm and Fine Filter Assembly:
1. Remove lower rack from dishwasher.
2. Gently lift and rotate lower spray arm counter clockwise to remove.
3. Rotate nut hub counterclockwise to remove. Gently lift fine filter assembly up. Remove fine filter drain from sump.
4. Clean fine filter screen if soil is present.
5. To reinstall fine filter and lower spray arm reverse procedure. NOTE: When installing fine filter make sure the drain port of the filter is engaged with the drain for the fine filter.
Replacing GE Spray Arm
The expandable center spray, spray arm and support are a one piece deal like some of the GE style built dishwashers are.
Spray arm parts link
This spray arm is threaded into a part under the tub/liner of the dishwasher. A rubber coupler on top of the motor and pump assembly is what this spray arm assembly screws/threads into. To change/remove this spray arm, simply push a flat screwdriver through the hole in the bottom of the spray arm and twist it off. It should be a regular thread.
General Electric Dishwasher Parts
Related Links​jeff sr.
Replacing GE Spray Arm
The spray arm and support are a one piece deal like many of the GE built dishwashers are.
Spray arm parts link
To Remove Lower Arm and Fine Filter Assembly:
1. Remove lower rack from dishwasher.
2. Gently lift and rotate lower spray arm counter clockwise to remove.
3. Rotate nut hub counterclockwise to remove. Gently lift fine filter assembly up. Remove fine filter drain from sump.
4. Clean fine filter screen if soil is present.
5. To reinstall fine filter and lower spray arm reverse procedure. NOTE: When installing fine filter make sure the drain port of the filter is engaged with the drain for the fine filter.
Replacing GE Spray Arm
The expandable center spray, spray arm and support are a one piece deal like some of the GE style built dishwashers are.
Spray arm parts link
This spray arm is threaded into a part under the tub/liner of the dishwasher. A rubber coupler on top of the motor and pump assembly is what this spray arm assembly screws/threads into. To change/remove this spray arm, simply push a flat screwdriver through the hole in the bottom of the spray arm and twist it off. It should be a regular thread.
General Electric Dishwasher Parts
Related Links​jeff sr.